Automation World July 2009 : IFCAC drives in 115, 230, 460 and 575V sizes CHECK OUT OUR PRICES ON GS2 DRIVES Start with cost-effective drives from AutomationDirect • GS1 AC drives (0.25 to 2 hp) start at $99, and offer simple Volts/Hertz control and electronic overload protection • GS2 AC drives (0.25 to 10 hp) offer Volts/Hertz control with built-in PID, 150% starting torque, dynamic braking and Modbus communications • DuraPULSE AC drives add sensorless vector control, from 1 to 100 hp FREE ground shipping on orders over $300* (including motors and drives) MOTOR CONTROLS Fuji Electric IEC motor contactors, overload relays, and manual motor starters, up to 300 hp (at 480V) AC MOTORS General purpose or inverter-duty AC motors, in standard or NEMA Premium efficiency IronHorse IronHorse GS2 Drives 2 hp 5 hp 5 hp AutomationDirect GS2 Price/Part Number 230V 460V 575V $241.00 GS2-22P0 $393.00 GS2-45P0 $ GS2-55P0 470.00 www.automationdirect.com For complete information or to order online, visit: www.automationdirect.com/drives 1-800-633-0405 WORM GEARBOXES Allen-Bradley Powerflex 40* Price/Part Number $645.00 22B-B8P0N104 $ 22B-D010N104 $ 22B-E6P6N104 965.00 1,030.00 All prices are U.S. list prices. AutomationDirect prices are from April 2009 Price List. Allen-Bradley prices taken from http://shop.rockwellautomation.com December 2008. Prices and specifications may vary by dealer and configuration. Prices subject to change without notice. * Includes sensorless vector control - least expensive series with 575V capability. • Controls from 1/2 to 300 hp • 45 mm to 169 mm frames • IEC-947, UL, CSA, CE approvals • Starting at $13.75 U.S. (9 amp contactor) www.automationdirect.com/motorcontrols • IronHorse general purpose AC motors in rolled steel (1/3 - 2 hp), cast iron (1 - 300 hp), and TC motors (1 - 100 hp) starting at $86 • Marathon inverter-duty motors with standard (0.25 to 100 hp) efficiency or NEMA premium (1 - 100 hp) efficiency www.automationdirect.com/motors • Cast-iron one-piece units, starting at $130 • Dual shaft and right-hand shaft outputs • Four frame sizes and six ratios • C-flange input for easy alignment • Hollow-shaft models also available www.automationdirect.com/worm-gearboxes Publication List |
